BambuLab X1C 3" Ventilation Duct Adapter (Press Fit)

Just like the title says - this is an adapter to attach a 3" ventilation hose to the back of the X1C (it may also work with the enclosed version of the P1, not sure as I don't have a way to test it).

I printed mine in PETG with a .4mm nozzle though I'd imaging PLA would work just fine as well.

Requires 3 - 2.5mm x 10mm (or similar length) screws. Simply screw them all the way into the provided hole - they then line up with the 3 mystery holes in the back of the printer. They simply press-fit into the holes and the threads “catch” the edges of the holes to hold the adapter in place.

If you found my work useful, stop by my BuyMeACoffee page!