Bicycle repair stand tray - Park Tool

I needed a tray for my bicycle repair stand. Since most of the time the stand is tugged away in the corner the tray should be removable.

So I created a cone adapter that is small and stays on the stand. The tray can be hooked in when needed. Also it can be swapped for different trays.

To mount the adapter you need:

• 4x M3x14 screws
• 4x M3 nuts

The measurement of the adapter are:

• inner diameter 37mm
• angle 10deg

Link to OnShape CAD model. Model can be measured, exported as step or modified:
https://cad.onshape.com/documents/897c3c907c2f5a4ecb042279/w/5eaf3e1394265418d9569740/e/3aa4ec25e1472e96ae701f46