RIGOL LA Probe Enclosure

This is an enclosure for the knockoff RIGOL logic analyzer sold on eBay: https://www.ebay.com/itm/224648789536

There are 2 parts - after printing they are to be glued together. I printed them with PLA and glued them with Krazy Glue (Cyanoacrylate adhesive). After the glue is dry the logic analyzer board is then inserted into the bottom and secured with four M2.5 x 5mm or 6mm screws. (you may have to drill the four holes in the main body with a 2mm bit to get the screw to start.) I added a piece of 3M 9448A to the bottom to give it a non-slip grip https://www.amazon.com/dp/B09XJ2TYTM?psc=1&ref=ppx_yo2ov_dt_b_product_details