Halloween Witch Coaster

The coaster is 90mm by 90mm by 2.6mm and is only photo 1(1 of 4 coaster designs) a test sample. set is aviable here https://cults3d.com/en/3d-model/home/halloween-witch-coaster-set

This Coaster can be printed using a filament swap at the start of layer 11, so if you are slicing it in Bambu Labs add a pause at layer 11 and that will ensure that the printer stops just as it start that layer.

If you like this design please consider checking out my Patreon where I will be releasing more designs and where subscribers will receive remix and commercial permission to all my work.
patreon.com/PeachyThoughtsFoundation , active subscriptions get remix and commercial freedoms!

This model was made using Make My Sign from Bambu Labs.

Printed using the A1 mini, .4mm nozzle with .2 layer height, speed 150-200mm/s, 15% infill, concentric top surface fill, ironing on top surface and takes about 1hr and 24mins to print. you might need to mess with the ironing setting to get better finishes depending on the slicing software you're using and the printer!