Manger Scene

I made this design for the Christmas Prusa Contest, but I didn't make it in time. Anyway, I still would like to share it, I hope you like it. 

This is a multicolor print using 5 filaments printable in almost any printer applying the Z HOP command technique in the Slicer software.

The files: Jesus, Star, Maria&Jose and Manger (print in this order) are made at Z=0,6 mm (3 layers at 0,2 mm height), and the base; the last one, Base, has 4 mm height. Take this in consideration when slicing all the models. 

I made the GCODE for my Ender 3 and if you want to use them, you should use the gcode files in the following order:

1. CE3PRO_01White_10m (Jesus)
2. CE3PRO_02Yellow_12m (Star)
3. CE3PRO_03Blue_26m (Mary & Joseph)
4. CE3PRO_04Grey_35m (Manger)
5. CE3PRO_05Black_9h11m (Base)

In every case, you must remove the skirt and print the next file without removing the previous one. 

I used colors for the files names, because it is easier to use remember them while printing, but you might use any colors you like.

References:

• Z Hop command: https://www.youtube.com/watch?v=0Sla-vIsvh4&t=74s