All printable parts for your Original Prusa MK3.5.
MK3.5 upgrade
Stage 1: Read the manual first!
- Don't disassemble the printer for now, follow the instructions provided in the manual.
Stage 2: Printing the required parts
- The upgrade package includes a spool of PETG black (400 g). It is a sufficient amount of filament to print all the parts.
- Optional: If you decide to upgrade your older Silver PSU to the newer Black PSU, remember to print PSU-cover.stl from the 'PSU upgrade' folder in the 'Files' tab. Print settings are described below.
Stage 3: Assembling the MK3.5S upgrade
- Follow the instructions, prepare parts, and then assemble your full MK3.5S upgrade.
Print instructions
Download the latest PrusaSlicer and use the following settings**:
- Print settings: 0.20mm QUALITY
- Filament: PETG (tested on Prusament)
- 15% Grid infill
** Note that print settings are recommended, but you can experiment with your own.
Tags
The author marked this model as their own original creation.