Car Trash Bag Holder

This is a hoop to keep a trash bag open.

There are three parts:

• A vertical piece that slides onto the edge of the opening in the side of the console (GMC Terrain).
• A hoop that snaps into the vertical part and holds a plastic trash bag. Use any small bag.
• Clips that keep the bag attached to the hoop. 
  • These are optional. I made 4 to spread around the hoop.
  • They have a 3mm hole. I tied them all together with a piece of string so they wouldn’t get lost.

Printing

Prints with no support. I used ABS as it will live in a hot car.

Assembly

The hoop and the vertical part snap together. Either slide sideways or push straight in.

Usage

I found it easier to remove it from the car’s console to install the bag and clips, then attach the whole assembly to the car.