Aquatic Feeding Den

This Aquatic Feeding Den aims to allow slender bottom-feeding fish, such as Kuhli or Neon Loaches, during feeding time or to give them a place to hide without being disturbed by larger aquatic species. This Den also will allow any small species or baby fish fry the opportunity to hide and feed under the same circumstances as well.

If printing as-is, the dimensions may vary depending on your filament and printer, but it is approximately 5.0 inches Wide and 6.0 inches Tall. The side holes are about 1.0 inch in diameter, and the grate-squares on the front are about 0.5 inches in diameter.
The feeding hole at the top can fit tubing under 2" in diameter.

Adjust as needed to fit your feeding tube. Enjoy!

This was test printed on PETG White food-safe Flashforge Filament.