KUSBA Pro Y Axis bed Mount

This is a simple mount to attach the KUSBA USB accelerometer to a 3d printer bed up to 7 mm thick. All you need is two M2 screws to mount the KUSBA, a long M3 screw and one M3 nut.

I have modified the screw holes so that they can be used to mount the KUSBA Pro - it uses M2 screws placed a little closer together than the original KUSBA. The alignment isn't perfect, but it does work well enough here.

I also made the nut hole a little bit bigger as the nylon m3 nuts I have did not quite fit the original.