T-BEAM LORA SMALL BOX IPEX

Hello here is a small box for Lilygo T-beam cards.

For this card LoRa GNSS NEO-M8N and NEO-6M card in ipex.

Some short tests with water projection and immersion. 

The box resists well, no trace of water in the case.

Only with ipex plug for the T-beam , sma plug output. 

25x25 gps antenna, with or without 9.6 or 1.3 inch screen, with or

 without push button 12 mm for the menu (io38).

Batteries :  1 or 2x 18650 / 21700 , 2x batteries only with no button.

Provide 8 M3x16 screws and 4 M2x10 screws.

Seal 2mm.

 1 x female sma pitgall output/IPEX 8 cm 

For the screen window 1x 1mm Polycarbonate Sheets . 

Print instructions :

Material: PETG OR ASA

Nozzle: 0.4mm

Layer Height: 0.2mm first layers after 0.15mm

Perimeters: 6

Infill: 100%

Don't forget to indicate that you like the model on printable.com.

Please send your opinions for future improvements.

and take the opportunity to see the older models.

73 F1NSR Yannick.