Le Havre Box Insert/Organizer

This is a box organizer for the Le Havre Complete Edition board game. I created this remix for 2 reasons:
-Added designs to the boxes to use less filament
-Created lids so that the box could be stored vertically

Note that I remixed the boxes a long time ago, but just created the lids recently. The boxes have the filament-reducing designs as part of the model. However, the lid models are solid. To get the reduced-filament designs you see in the lids in the pictures, print the model with zero top and bottom layers and use a honeycomb infill. I used 25% infill.

As you can see in the picture, I used foam to fill in the bottom of the box to allow the organizer, board, and instructions to fit tight with the lid on.

I used Deck in a Box to design the lids:https://deckinabox.sgenoud.com/

I didn't print lids for both card trays. I just printed lids for the one tray and put it on top of the other tray with no lids. you could print lids for both trays I guess - a total of 6 card lids.

• Added designs to the boxes to use less filament
• Created lids so that the box could be stored vertically