Shower Phone Caddy

I designed this model from scratch, but i took inspiration from this design https://www.thingiverse.com/thing:4870404 by jdharris, i used his design before with my old phone, it worked fine, but the tolerances werent the best (they may have been my old printer, idk) but fundamentally i didnt like the way the phone sat in panoramic view, i think this design is more secure.

if you want to support me or want the .f3d file to edit as you wish, you can buy the model in this link

https://cults3d.com/en/3d-model/tool/shower-phone-caddy

 thank you in advance :)

this is made to fit courtains rods smaller than 30mm.

there is two versions of the hook, the shown in the photos is the backside one, i think is a little bit better because it makes the phone tilt a little bit downwards and is better if your shower courtains are a little tall. the frontside one makes the phone stay straight.

HOW TO SCALE:

LENGTH:

the model is designed to fit a s23 FE with a case perfectly, the s23 FE with a case measures at 162mm so, if your phone with the case measures 167mm you do this: 167 * 100 / 162 = 103.09, so you have to scale the caddy ONLY in the length axis to 103.09%.

THICKNESS:

you have to apply the same for the thickness of your phone, my phone with a case has a thickness of 14mm at the widest, so if your phone with case measures at 11mm you do this: 11 * 100 / 14 = 78.57, so you have to scale the caddy ONLY in the Z axis (height) to 78.57%

if your phone is thinner than 14mm, you dont need to scale the hook, it should be fine, but if it's thicker, you may have to scale the hook so it can fit the caddy. you apply the same process as above.

PRINT SETTINGS:

i printed it with a 0.6mm nozzle at 0.32 layer height, 2 walls, 3 tops, 3 bottoms, 10% infill.

It took like 3.5 hours total and about 100 grams of PLA.

but you can print in whatever settings you like, it should print fine and be strong enough regardless.

NO SUPPORTS NEEDED.

i only added to tabs as shown in one of the photos for the hook tips so they wouldnt lift, but if you have good bed adhesion it shouldnt be a problem