Ender 5 Plus Sprite Pro Cooler for Dragonfly BMS

Finally burnt up the tips on my original cooler and designed this one to work with the Ender 5 Plus, fitted with a Sprite Pro extruder and a DragonFly BMS hotend. The cooler arms mount to the side of the Sprite extruder with 4 - M3 x 10mm bolts and has a friction fit housing for a 5015 fan. The cooler will mount on the back side of the Carriage but does not cause issues with homing or any pom wheels. The cooler is made specifically for the Sprite Extruder, no additional mounting options are available.

Recommend printing the cooler with the outside flat surface of the fan opening laying flat on the build plate and the mounting and cooling arms pointed up. Allow support from build plate.

Print with your desired filament and 15% infill.