The Heist - Puzzle Box

Checkout the IMPROVED REMIX https://www.thingiverse.com/thing:5140061

Summary
Hilarious YouTube Homemade Commercial: (April 30, 2021)

Assembly Instructional Video:
https://www.youtube.com/watch?v=hI5dVq\_0oe4&lc=Ugzpjna8nFBcAoASS8Z4AaABAg

THE HEIST: SOLVED Video:

The Heist - Puzzle Box is an original design by Leisure Luke. It's a 23 Piece Puzzle Box that is SUPER EASY TO PRINT! No Supports Needed. Print it in PLA! Parts without squiggly springs can be PETG or PLA. Very little plastic used!

0.1mm tolerance for all non-sliding parts.
0.2mm tolerance for sliding parts

Verified to Print well at 100% and 150% sizes (0.4mm nozzle, 0.2mm layer height)

My Colors for each .stl model
Gold: Gold, Tool
Blue: Diamond_T7
White: Bolt, Barrel, BarrelSpring, BarrelPinV2
Marble: HeistLid, UpperBoltClamp, LowerBoltClamp, SafeBar, Spacer, Heist_Base_SafeCo_Pv5, Dial
Black: VaultDoor, Clips_Print_3_of_These, ClipSpring
Red: Pins_2_and_3, Pin_1, PinClip, DoorButton

You should be able to straight from the PRINT bed to ASSEMBLY! No External parts needed - no metal springs, no bearings, no magnets, no electronics, NO GLUE, NO SANDING... you get the idea!

As tested - 100% PLA 3D Printed!

Print all 20 pieces and 3 clips and they'll fit together pretty easily. Watch the YouTube video, I use a pliers for some parts of the assembly, especially at 100% size.

Again, see the YouTube Videos to get excited, for assembly, and if needed, to show the solve as well!

LATEST Puzzle Box from Leisure Luke Here: https://www.thingiverse.com/thing:4923994

Comment, Provide Feedback, I always want to improve these puzzles for the final larger project!

These are all modular pieces that will be a part of a larger project... that I rambled on about in Episode 1 :P Basically, each puzzle becomes a side of Puzzle box that I call - the 5 aces. After the 4th Puzzle Box I'll release the final pieces required to do the full "5 Aces" Assembly. I'll also be printing and sending that puzzle box to a few youtubers to solve, and possibly selling a fully-assembled version on Etsy (if people are interested). Thanks for all the likes and feedback! I need more feedback always!

I'd love a like, follow, subscribe, etc. I'm hoping I can keep making cutting edge puzzle boxes bigger better and FREE for a long time!!!!

Check Out The Key &The Launch Puzzle Boxes at my Thingiverse Page!

https://www.thingiverse.com/leisureluke/designs

Like, Subscribe, Follow, Collect, and I'll keep making puzzle boxes!
Enjoy!

5/6/2021 10:29PM UPDATE - BarrelPinV2 now posted, resolving 1st layer height issue.
5/7/2021 3:35PM UPDATE - PinClipV2 resolves issue getting "stuck" when barrel is at 45 degrees.
5/26/2021 UPDATE - DoorButtonV2_test has been uploaded for those who need to press the button in and down for the door pins to full unlactch. This also tightens the gold wiggling, and forces the pins lower when DoorButton is pressed. LOOKING FOR FEEDBACK, Is this better for most people?

Print Settings

Printer:

Artillery Sidewinder X1 V4

Rafts:

No

Doesn't Matter

Resolution:

0.2

20

Filament: TECBears PLA Black, Red Silk, Marble, White, Gold

Notes:

All Parts can be printed in PLA or PETG