Bionic

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA BambuLab Basic Black
• PLA Overture Chocolate Matte
• PLA Overture Chocolate
• PLA Overture Brown
• PLA PolyTerra Peanut
• PLA Ziro Skin
• PLA BambuLab Basic Jade White

Swap Instructions:

• Start with Black
• At layer #9 (0.8mm) swap to Chocolate Matte
• At layer #14 (1.2mm) swap to Chocolate
• At layer #17 (1.44mm) swap to Brown
• At layer #21 (1.76mm) swap to Peanut
• At layer #25 (2.08mm) swap to Skin
• At layer #27 (2.24mm) swap to Jade White for the rest.