Wooden door - Compatible with Lego (r) Bricks and 25mm TTRPGs such as D&D (r)

Love Lego®-compatible bricks? Love TTRPGs? Then you'll love these pieces! this door and threshold piece fit with a brick system that is designed with 25mm based miniatures in mind (28mm height minis). A 3x3 lego piece is 24mm x 24mm, so while this is not a perfect scale, it is close enough and has worked well in practice.

Add these to your TTRPG campaign to easily keep track of what doors are open and closed.

Each brick uses standard Lego brick sizing (4mm width and length per stud less a 0.2mm buffer, with 9.6mm height), with some modifications for a tighter fit and to accommodate the nature of printing PLA. 

This door is slightly less than 6 bricks tall, and is designed to have a brick across the top to keep it in place. The top stud of the door is shaped to ensure minimal friction for opening and closing while still solidly being held in place.  This door, as well as other pieces in this collection, assume a 6 brick tall wall per floor of a building.

Print Settings:
Print at 0.2mm with all other standard PLA settings. Recommend organic supports. Recommend printing both of these with the bottom facing up (as the STLs already are set) - this helps ensure there is no warping of the connection pieces and that these pieces will fit on a standard brick layout.

NOTE: This is not in any way endorsed by or attempting to claim any relationship with the manufacturers of Lego® bricks.