Dual Build Plate Film Sticking Fixture for Bambu 256x256 plates

Since I had two Bambu X1 Engineering Plates I wanted to change one Engineering Plate with the High Temperature Plate, but that was the wrong side of the plate for my Film Sticking Fixture. So, I decided to mirror the Bambu Lab Film Sticking Fixture. But, why print a new mirrored fixture and have two tools, when I could combine the two into a single tool. I couldn't find where this had been done, so I modeled a Dual Film Sticking Fixture. Hope someone finds it useful.

UPDATE: Please carefully align the sides of the High Temp surface or a side may slightly overlap and edge.  If this does occur, do not try to pull the surface back off to realign.  Just trim the overlapping edge.

Added the mirrored side of the fixture to allow it to be used for reverse side of build plate