Mean Well RS-25 Enclosure

This enclosure is designed to house the Mean Well RS-25 series of power supplies with the following features.

• Isolated sides for high and low voltage
• Ports for cable gland strain relief
• Secure mounting of power supply with 2 screws
• Secure closure with safety screw
• Air vents for PSU thermals

Required additional parts:

• 2 - M3X25 Screws
• 1 - M3X8 Screw
• 2 - ¼" Cable Glands

The model also has single layer tabs that help prevent curling of the sharp corners. These can be easily clipped off after printing.

And if your wondering, yes I am using ethernet for the low voltage cable.