UPFRONT!
I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other channels are ONLY for my thermal builds!
_________________________________________________________________________________________________________________________
Heltec fixed the “long message” and “Bluetooth disconnect” problem with a new hardware Revision, make sure that you order the updated version to avoid problems!
__________________________________________________________________________________________________________
I got special permission from Gendemik to share my remix! I had to choose “Original, I made it” to publish the remix as I am not able to link to the original design as its license does not allow sharing and remixing.
AGAIN the BASE DESIGN IS NOT MY CREATION! I just got permission from Gendemik specifically for my REMIX that allows me to share it!!
Dont miss out to check their other creations and leave them a like for allowing me to share my remix with the world!: Gendemik | Printables.com
You can find the original design this remix is based of here: GDMK Heltec v2/v3 Diddy (Smallest case project) Meshtastic inspired by Gendemik | Download free STL model | Printables.com
-----------------------------------------------------------------------------------------------------------
There is no manual/ how to/ guide for the upgrade, you have to know how to do this yourself!
The “Advanced” variant of the DIDDY Remix is not meant for everyone but those with the technical knowledge and tools to build this!
It adds a navigation switch for canned messages, notification LED light bar, vibra motor to the already existing buzzer in the original build.
The original build you can find here:
Meshtastic Gendemik "Diddy" T114 Micro Node REMIX by LWC | Download free STL model | Printables.com
Part list:
SMA Ipex cable: SMA Female 5CM
Vibra motor: 0820
Much better antenna then the stock one the heltec comes with, select correct frequency for your region: (optional)
Mosfet to power buzzer and vibra motor as NR52 output power is to low: SI2312
Buzzer: (8.5x8.5.3mm 3volt)
SMT LED 3 Volt ( choose whatever color you like)
Metal belt clip including mouning rivets (2,5x5.5cm):
Screws (M3 8mm):
Wiring cable 0.3mm:
Acrylic glas (display protection) optional: 18x28mm
Navigation switch for canned messages K2-02 hollowed shell:
Main power Switch:
Case screws: M3 20 pieces 8mm length
Lipo Battery ( 10 pieces but you can find smaller amounts as well):
The author marked this model as their own original creation.