Box for brass ballast bars Miro Model Ambrosia F3X

This box is for packaging the original brass ballast bars for the Ambrosia F3X from Miro Model. It fits four bars, each 14x14x211mm. The upper and lower shells are printed separately and connected by a hinge made of 2mm spring steel rod. The seat of the spring steel rod may need to be carefully drilled out with a 2mm drill. The upper shell is designed to accommodate a 1 mm layer of foam rubber to fix the ballast bars. Alternatively, flexible material such as TPU can also be used.

The upper and lower shells print well in Prusament PETG 0.2mm STRUCTURAL standard settings with 15% infill.