Xiaomi 14 Ultra Photo Kit camera cover (TPU print)

Made this camera lens cover for Xiaomi 14 Ultra with Photography kit

Simply cover your lenses to protect them.

Inner ring is to separate the middle as first version was getting the lenses dirty.

I designed v4 version which is easier to snap and to remove and has inner ring with lower height. - If you have good flex material, this is ideal.

I designed v5 version, which uses more material and is thicker +1mm from sides and bottom, as previous versions started to fall out after couple of months (I print from Fiberlogy FiberFlex 40D). So if you have type of filament that get's loose after a while, try this version.

Mi14Ultra photo cover_v4 - later version, but some might prefer older version so I leave it here.

Mi14Ultra photo cover_v5 - added 1mm to bottom and side. Otherwise same as v4.

Printed with TPU (see below) on Prusa MK4

Print settings:

- printer: Prusa MK4
- layer height: 0.2mm
- sheet: satin / carbon fiber texture sheet from aliexpress
- nozzle diameter: 0.4mm
- print orientation: flat side down
- material: Fiberlogy FiberFlex 40D Graphite
- supports: not needed
- perimeters: 3
- solid layers (top/bottom): 5/4

In case you want print settings for this TPU on MK4, let me know. It was a hassle for me to find ones that are working.