Ratrig v-core-4 Ortbiter Filament Sensor Vertical Toolboard REMIX

The standoff for the Vertical Toolboard for the Ratrig V-Core 4 doen't fit if you use the Orbiter 2.0 filament sensor.   I've remixed it.  Press fit in the standoff and you will not need to cut or modify the standoff.  If you want added security, add a washer to the screw.

Print Settings

Perimeters: 4

Layer height: .2 - .3mm

Infill: 25%

Supports: None

4 top / 4 bottom at a min.

11/05/2024
I updated to the latest version and increased the hole size to 5.6 which will allow the standoff to fit inside.

https://docs.ratrig.com/v-core-4-0/bom#FILESVC4