Legend of Zelda Shield

Halloween is just around the corner and my kids needs shields to start their Link costumes. 

Everything is designed to be printed in multiple parts, then glued together. Everything fits the MK4 and most individual parts fit the mini (except the blue backing). 

All parts have a .1mm gap so everything glues together smoothly, some light sanding might be needed on the crest part (to remove the support material). If the crest parts are too tight, try shrinking them a couple of % with the scaling option. 

Crest part can be a bit picky to stick on the print bed, I reapplied stick glue and added a brim to fit the problem. 

Print everything with a .25mm layer height to give a nice wood grain feel (and faster print time)

Happy printing!