Monitor Mount - Spektrum DX6i - Hawkeye Little Pilot

I knocked up this little mount so I could attach a little Hawkeye Little Pilot 3.5" monitor onto my Spektrum DX6i transmitter. It has a stepped 3mm mount hole (so you can use small washers if required) and uses an M4 bolt and nut to clamp it to the antenna.

Quick and easy print. Print it 'upside down' so the non-sloped face is on the bottom.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

No

Supports:

No

0.2

Infill:

30%