Enclosure for FlightRadar24 Raspberry Pi Basestation and accessories

I needed a case for a Raspberry Pi 3 Model B+ which I was planning on using to create a Flightradar24 tracking station. The Pi required an RTL-SDR dongle and a Flightaware 1090MHz ADS-B filter to also be connected so I decided to try and adapt an existing case to include an accessory bay where these additional components could be mounted.

As the Pi was going to be working 24/7 and was getting quite warm, I decided to also fit it with a heatsink/fan to help keep it cool and found a very nice & cheap one on Amazon

https://www.amazon.co.uk/gp/product/B07JGNF5F8

This meant I had to increase the height of the top section of the case to allow the heatsink to fit.

To mount the accessory tray, I used some M3 standoffs and attached them to the VESA mount holes on the main case.

Why not build your own ADS-B tracking station?

https://www.flightradar24.com/build-your-own

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

No

Supports:

No

200

Infill:

30