Body/Hair Scrubber

If you are struggling to clean your long hair/beard deep or want a deep scrub this is exactly what you want. Not only does this make easy cleaning it also does a great job catching the weak hair.
I used model 1 (7mm strand) and it did a really good job!

How to use:
For model 1&2 put shampoo on your hair and start scrubbing, if you put it on the scrubber it tends to stay on the scrubber.
For model 3 you can put the liquid onto the scrubber.


Print parameters:
Filament TPU95A or lower (TPU 98A If you like it to be hard)

3 walls, solid base(99 top or bottom), 0.2mm layer height or lower

(Make sure you have good layer adhesion)

Make sure to get rid of any stringing and wash it before using, because there is already too much microplastic in the human body and you wouldn't want them in your hair or beard.

Demo Models
If you aren't sure which length you want to print, you can print these little test scrubbers.


Model 1
7mm long strands
Good for deep cleaning for long hairs or if you like deep/hard scrubbing.


Model 2
4mm long strands
Good for those who don't like hard scrubbing and is still usable for long hairs.


Model 3
2mm long strands
Good for body washing, but not recommended for hair, you can still use it for short beards.


If you have a feedback or questions let me know in the comments.