Fully Printable Hinge 270 Deg

A fully printable hinge which allows for 270 degrees of movement.
281
505
2
1553
updated September 11, 2024

Model files

hinge_modified.stl
hinge_modified.stl
470 kB  |  September 11, 2024

Model origin

The author remixed this model.

Differences of the remix compared to the original

Basically 3 differences:

  1. Size was reduced to fit M3 Allen bolts
  2. The round corners under the center were trimmed to allow 0 - 270 degrees of movement
  3. The pin hole is noe 2.6mm (to fit 2.5mm rods).

License