This adapter for the Silvercrest 20V (SHAZ 20) allows you to split the vacuum cleaner tube into two parts so it fits better in your designated storage spaces, such as Tanos/Festool Systainers with the height of III (3) or other boxes. Important: This modification may damage the device and will void the warranty.
The total length of the disassembled tube is exactly 38.5 cm. To achieve this, cut the tube precisely in the middle. Then, glue part 1 onto the upper section and attach part 2 to the lower tube. Before gluing part 2, insert the lower tube into part 1 to determine the correct spacing. Afterward, glue the latch onto the pre-marked spot.
Tip: Grease the tube connection for a better fit. You can then attach the power adapter using the rounding adapters on either the left or right side. Finally, depending on your preference, you can route the wiring. There are two options: either drill a hole to fit the wire through the designated guide or run the cable along the surface. Adjust your power adapter based on the connection method you choose.
Part to Use :
PLA or PLA+
Any superglue thick one works best
Female powerport:
https://www.amazon.de/dp/B09PD6J4BN
Male powerport :
https://www.amazon.de/dp/B0CX44M91T
The author marked this model as their own original creation.