3D Models 3D Printers Test Models

Test Print : Overall Complete Printer Test Object

.gallery-skeleton { display: none; }

Test Print : Overall Complete Printer Test Object

Overall Extreme Printer Test: Overhang, Ringing, Stringing, First Layer, Pressure Advance, Accuracy Test (20x20mm)

1,030

4974

44

13 k

updated October 11, 2024

Makes

Comments

Makes only

@TimMcDonough_455877

PLA filament. Actually printed on a Bambu Lab P2S, but that option wasn't a choice in the drop-down menu.

@JamesMakes_209968

Can't wait to try again with input shaping.

Nice print!

@Tiffi226_1777499

Looks kind a funny… 🤔

@AaronTpain_2703255

love this test print went well but had some strands under the roof

Thank you!

Printed with 0.25mm nozzle with matte PLA. A little sagging on the top, but otherwise printed very cleanly.

Nice print!

PETG, strings a lot, bad at bridging, but I still managed to pull it off :)

@flaiming8_2830917

which infill should I use

@flaiming8_2830917 15% With 2 perimeters :)

Viet Tran Hoang

@viet_th_1031593

Orca Slicer 2.2
PLA+
Speed: 124% (edited)

Nice!

@DiegoGarcia_2531463

Abs 250C 100C 130mm
No supports
Orca Slicer 2.2

Clean!