Fork Adapter for SKS Bluemels Prime 45 28" bike fender/mudguard

If you want to attach a front SKS Bluemels Prime 45 fender to your fork with the mounting point on the rear side you can use this adapter to enhance the position.
It was originally designed to work with a TRP CX carbon fork but might also work with other similar designs.

You need to remove the riveted mounting adapter from the fender. This can easily be done with a cordless drill using a 3mm drillbit.
After removing the old adapter, install the printed one with two M2,5 screws plus washers. Drill the third hole with the adapter attached to ensure a perfect fit. Then install the fender on your fork and voila: you are protected from rain and road debris on your commutes!