Vive Tracker Shoe Foot Plate

A laser cut-table and 3D printable plate to hold a vive tracker onto a shoe using laces using ¼  20 tripod bolts. 

I have tested this using the htc vive 3.0 trackers however they should be compatible with all trackers that use ¼ 20 bolts. 

If you laser cut this model use 3mm thick material. I suggest using wood as the base material and sanding down the inner edges of the shoe lace holes.

The model I originally made used these bolts from McMastercarr 

https://www.mcmaster.com/92865A172/ . 

However can be supplemented for ½" round head bolts in a pinch using the included spacer if you don't mind the bolt protruding from the plate.

I designed this in fusion 360 to be somewhat parametric to fit different shoes if the default model doesn't fit well. So if you find the hole spacing to be off. I have including the source file for modification.