6-in-1 Unlock! Boardgame Insert

If you own some Unlock! games, you know that it is basically a BIG box for 3 decks of cards… And if you have many of them, you would probably like a better way to store it.

That's what I did with this model : it allows to put 6 full Unlock Games in only one box (with the lid almost fully closed).

You'll find :

• 1 universal box that fits all the standard Unlock Adventures,
• 1 box for short scenarios (with the boxe) including place for 2 tutorials
• Many lids to allow you to choose the one corresponding to your boxes (Secret Adventures, Mythic Adventures, Timeless Adventures,…).

The model is supposed to be printed with magnets (Diameter 6mm and height 3mm) in the box and in the lid. You can print it : 

• without magnet (wont be visible), 
• with 8 magnets,
• with 4 magnets (Choose the correct diagonal on the box and the lid).

If you want to add magnets : 

• Be careful with the orientation of the magnets when placing them.
• Don't forget to add pauses in the slicer to be able to include them before it ends ! See pictures to understand when and where.

Enjoy !