Cap Wrench

It's a cap wrench.

It grips when turned to the left and works on the most common cap sizes (27-31mm). I used a #6 washer and screw for the bottle opener, but it can also accept an M3 x 3mm heat set insert and 10mm screw for a stronger connection.

The cavity inside will accept 10x2mm magnets if you so desire.

Please let me know if there are any issues and I will update the model!

Updates:

• Updated lids have tighter snap fits and allow for 2 or 3 magnets inside (one works but is pretty weak)

Print Settings

Printer Brand:

Creality

Printer: 

Ender-3 Max

**Rafts:**

No

Supports: 

No

**Resolution:**

.2

Infill: 

25

**Filament:** Overture PLA 
 

Notes: 

100% concentric infill on gripper is recommended

Category: 3D Printing