14" MacBook Pro Horizontal Stand (M1, M2, M3)

I wanted to stand up my MacBook Pro along the back of my desk to give me more usable desk space. I couldn't really find any options I liked, so I decided to make my own. I did my best to replicate an Apple-esque style, using very close to the same radius as the bottom edges of the MacBook, as well as SF Pro Text for the font, to mimic the logo on the bottom cover of the machine. A solid version without the text is included if you wish to have a cleaner look.

My personal MacBook Pro has a skin and a lot of stickers on it, and measured at 16.5mm in depth. If your MacBook has a skin, this should work fine, but I fear that it may become wobbly with an unmodified machine. If you are concerned about this, I recommend cutting a small section in your slicer to test fit for thickness first (and tell me so I can make two versions!), or decrease the size of the print to 98% (this would land the middle area thickness within 0.02mm of what I can find on google for spec).

As always, any and all feedback is appreciated!