Keystudio's RPi Pico Breakout Board Mounting Plate

This is a mounting plate for the KeyStudio Raspberry Pi Breakout Board.  I have included three types or configurations of this plate.

• “base_plate_with_mounting_holes.stl” This Plate has four tabs to screw, bolt or glue to another surface. 
• “base_plate.stl”   This is the same plate, without the mounting tabs. This Plate is good for protecting the bottom of the Breakout Board and preventing short circuits while using it on your work surface. 
• “vice_block.stl”  Vice Mount Block. Using either plate, glue the “block” to the back of the plate. This block  works well when using the “Prima Nano Vise”, https://www.thingiverse.com/thing:5149089

Hardware Needed to mount the Breakout Board to the Plate:  4, M4x4mm Pan Head Screws.

KEYESTUDIO Raspberry Pi PICO Shield Pico Breakout Board for Raspberry Pi Pico/Pico W/Pico H
https://www.amazon.com/dp/B0D3KWTLF2?ref=ppx_yo2ov_dt_b_fed_asin_title