Shelf joint

Simple joint models to create shelf structure. To avoid the supports, the models can be split and then gluing is unnecessary.

Models are prepared for rods with 10mm diameter. 
https://www.hornbach.cz/p/tyc-konsta-kulata-10-x-1000-mm-buk/5485759/

To secure joints on the rod, especially the vertical one. The model has predefined holes for screws 2,5x12mm. TIP: preheat the hole to prevent cracking joint around the hole.

https://www.hornbach.cz/p/univerzalni-vrut-2-5x12-zh-pz-zinek-zluty-250-ks/6337145/

As a floor is used beech board cut into 25x40cm parts. Joins from construction then goes through the board by 14mm holes.

https://www.hornbach.cz/p/sparovka-bukova-18-x-400-x-800-mm/3867636/

https://www.hornbach.cz/p/cv-vrtak-do-dreva-alpen-o-14-mm/4049445/