Chicken coop 2" PVC pipe feeder mounts and funnel

I made a 2" PVC pipe feeder for a small coop I'm using to raise 2 chicks until they're old enough to integrate into my flock. I made a flange to support the pipe through the chicken wire underneath the coop so that it wouldn't get wet from rain, along with brackets to mount the pipe to the exterior of the coop, and a funnel that fits flush against the coop wall. I thought maybe somebody else could use this too!

I used 2ft of 2" PVC, a 90 degree elbow, and a 45 degree elbow so that the feed stays in the pipe. The chickens have to put their head into the pipe far enough so that they can't knock all the food out and waste it.