Soozafone I have a question. Is the dummy standing in the model picture a print in place version of the dummy 13?
Soozafone I have a question. Is the dummy standing in the model picture a print in place version of the dummy 13?
Hey just wondering if I can sell this?
@Adler_2902009 You cannot resell these digital files. You can sell physical prints of Dummy 13 as per the CC-BY 4.0 license.
Why remix is not allowed in the license? Isn't it the purpose of the files?
@KonstantinMi_2476066 All files in the store have to have a standard license. Please read the description for the workaround.
Used the design files to modify the leg and arm armors to create a stretched, demonic look to go with the bone wings.
A model that requires adjustments and adaptations for slicers. (edited)
@DiegoBorja_2326283 There is a known issue with the STEP file export where it adds an extra sphere which makes things not flat. I am trying to find a solution.
The point of the STEP file is to work with them in a CAD program. If you are bringing the parts into your slicer, you should just use the STL files from the public model. The slicer converts the STEP file to a mesh, so you might as well just use the STL.
@soozafone My solution was to remove the "frame-chest" part from the "runner, frame v1" file in fusion 360 and repairing all the objects with the slicer. You should post a video tutorial with some of these solutions. Thanks for your reply 🙏.
Beautiful design and engineering. My grandson loves dummy 13 and mini 13.
Can you add .obj or .STL files to this?
I use the iPad for 3d work, and it's a nightmare trying to use .step or .f3z files.
At best, I've been able to open the files but half the objects are merged, completely ruining the point of buying t pose figure for creation.
@OrksOrksOrks_2662695 These are just the design files. The stls are free. Check the description ;)
There's a lot in here
@_1614077 I got this too...One workaround is that you can rename it .zip and open some individual files. Open the JSON to see what's what
Used these files to make a custom branded head for the Dummy 13. The files are nicely laid out and the timelines are organized, so it was fairly straightforwrad to increase head size and add the brand logo. Thanks for making these available!
@JGlass_103762 Can you share what filament brand did you use for armor?
Absolutely marvellous! The instructions were perfect, so the first print already turned out nice even though I am an absolute novice.
Little buddy will greet my guests from now on :)