Bevvy - Adirondack Chair Beverage Holder

My Adirondack chair arms are sloped so drinks slipped off if you set them there, so I created this to hold beverages on the arms.
(My chairs: https://www.amazon.com/gp/product/B00A7KJG58)

I specifically designed this so that it can be printed on-end with no supports (max angle 45 degrees), but it did turn out to need rafts with one filament I used, so I always used it.

Additionally, I could print 4 of these at a time on my printer (just barely w/ the rafts)

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

Yes

Supports: 

No

Resolution:

.2mm

Infill: 

15%

Filament:
Atomic Filament PETG

Emerald Green 
 

Notes: 

I used 2 raft layers in PrusaSlicer.

How I Designed This

Used Autodesk Fusion 360 (I'm a newb). I included the file in case you wanted to modify it for your chairs