Works great! Just the right amount of clearance for hotswop sockets. This print is slightly larger than the splitKB metal versions, so the hole in the backplate needs to be a bit larger than the splitKB footprint. ([splitKB recently released a KiCad footprint]( https://github.com/splitkb/tenting_puck) that has an OD of 41.1). I used a 45mm hole in the bottom plate with this print, and it worked well for me.
Works great! Just the right amount of clearance for hotswop sockets. This print is slightly larger than the splitKB metal versions, so the hole in the backplate needs to be a bit larger than the splitKB footprint. ([splitKB recently released a KiCad footprint]( https://github.com/splitkb/tenting_puck) that has an OD of 41.1). I used a 45mm hole in the bottom plate with this print, and it worked well for me.