Pokemon inspired, Spiritomb, Tabletop DnD miniature
Prusa MINI / MINI+
0
February 25, 2023 at 4:08 PM
Comments
@PixelChroniclesMinia It wasn't too bad scaled to 300%. I tried first with 0.4mm nozzle but my printer is pretty out-of-tune, so with the 0.6mm nozzle it was more forgiving at the cost of details. The organic supports worked surprisingly well!
@Jimmy_67261 Awesome job! Was it easy to print?
Used the new organic support in Prusaslicer 2.6
Prusament PETG
0.6mm nozzle, 0.2mm layer height