EVA 3 Inlet for EBM-Papst RLF 35-8/14 N

@Heisenberg19x This is a problem with EVA 3 on the V-Minion. I modified the normal single 5015 inlet to fit the Papst fan. The dimensions for the lower half of the part are 99,9% the same. The default EVA 3 part will also collide with the motor mount or the motor itself. You have to modify your endstop position and will lose about 2-3 mm of travel. Nothing i can do to fix this easily, because the lower inlet on the EVA 3 backplate is wider than on EVA 2.4.