[BaBo duo] AMS drawer stacker
Bambu Lab P1S
0
Original model
Comments
First insert all screws and turn them 2-3mm in and tighten all at the end.
@PhiTauBill_198745 The Problem is wrong assembly of the AMS frame... run into the same issue...
@reneger_3289460 My 2nd AMS2 had less issues... not sure why... perhaps it was user error...
@PhiTauBill_198745 yes, you can assemble the frame in a wrong way, that lead into that problem…
This is a great model, so very well designed and very happy that it has been updated for the AMS2. I am running into an issue, however with the lining up the holes in the bottom of the AMS2 to the AMS frame. See picture (which isn't great, but is meant to show that they are a few mm off). Any thoughts on how best to resolve?