Works as a replacement for my broken part but the fit for the black cap isn't good, your model is missing shallow (maybe 10 or 12 degrees?) angles on all four corners for it to be perfect.
If you *really* want to match the original part there's a loft / draft on the outer surfaces, but that's likely there for injection molding reasons.
I like the addition of the screw hole on the other side, that ain't going anywhere.
Also, consider posting a STEP file in addition to an STL, they're much easier to import and edit into just about any CAD program.
FYI: The Sovol SV01 Pro also uses this tensioner.
Works as a replacement for my broken part but the fit for the black cap isn't good, your model is missing shallow (maybe 10 or 12 degrees?) angles on all four corners for it to be perfect.
If you *really* want to match the original part there's a loft / draft on the outer surfaces, but that's likely there for injection molding reasons.
I like the addition of the screw hole on the other side, that ain't going anywhere.
Also, consider posting a STEP file in addition to an STL, they're much easier to import and edit into just about any CAD program.