Polymer/Ceramic Clay Stamps
Bambu Lab P1S
0
January 13 at 4:21 PM
Original model
Comments
@Kuberman Unfortunately I didn't notice it was made of resin. I enlarged it a bit and it worked. Thanks for the heads up (edited)
@BretaKrupick_2642581 The creator printed the stamps with resin. In the FDM process, you would probably only be able to do this with a very small nozzle. But it won't be as good as with resin.
https://youtu.be/ngpw0ojHODA?feature=shared (Maybe this will help)
Unfortunately I didn't notice it was made of resin. So the first print on the FDM printer failed. When I realized this, I enlarged the printout and it worked. (edited)