Stackable Dry Box for Filament
Comments
@ScottM_1264467
I agree; extra fixation for the gasket might be redundant and should be reconsidered.
The version with removed fixators makes sense.
There is also the possibility of having a material-type abbreviation printed on the sample card.
I'll think about these updates. Thanks!
@happymaker I would think something could just set in the groove and let the pressure from the locks provide the hold. Maybe an hexagonal shape where the vertices point into the top and bottom and the sides provide the solid spacing. I would think setting the hole depth in the top and bottom to 2/3 the vertex height would give ample squish to provide the needed barrier.
I would also be interested in a version without the filament holders (inside and out) and a space to hold a sample card. I will be uploading the model I made and use today.
https://www.printables.com/model/986278-filament-sample-card
Thanks (edited)
@ScottM_1264467
Thanks for the feedback!
Yeah, I'm not happy with the gasket mount, either. I used a knife to push it into the gap in problematic places. I plan to find a better design solution in the following model updates.
Creality White PLA for the box, Geeetech Clear Blue TPU for the gasket, Creality Black PLA for he desiccant holder and EZChoice Statuesque PLA for the locks, though I will likely reprint those in PETG later.
Gasket is a real pain to get in, but should be worth it in the end.