Artillery Sidewinder X4 - Extruder Cable Mod
Artillery Sidewinder X3 Pro
1
February 25, 2024 at 2:53 PM
Original model
Comments
@RafaM_788135 thanks for the Feedback! - When using the cable clip artillery provides for mounting the cable nearby the lead screw on the left Z rod, the cable should not be hanging this low and you need only as much cable to be able to move the extruder to the far right side of the X axis... and if you can wait a bit, I will add a second part to it for fixing the cable way better on the X Gantry nearby the lead screw...
Thank you for the design, it fits perfectly and does its job. However, I wanted to warn against placing the cable too low after mounting this print. The cable hangs too low, causing the table to hit the cable bundle in the first layers. I fixed it myself by bending the cables and using two additional zip ties, now it's ok