> having a bit of clearance issues with other cooling brackets Thats exacly the troubles i had. This one fits as i need it to.
Thanks for the design!
2x M3 12 screws fits perfectly, and 1x M4 25 to hold the fan (M3 should work also, but i don't have any of that length).
Printed out of PETG with minimal supports with 0.6 nozzle and 0.3 layer height without any issues. But i'm planing to redesign it a bit and print with higher quality. My 5015 fan wont fit into the hole and event cracked it a bit, so i tied it with a zip tie for now.
Speaking of remix - can i ask you to share the STEP file? Or anything with proper geometry data.
> having a bit of clearance issues with other cooling brackets
Thats exacly the troubles i had. This one fits as i need it to.
Thanks for the design!
2x M3 12 screws fits perfectly, and 1x M4 25 to hold the fan (M3 should work also, but i don't have any of that length).
Printed out of PETG with minimal supports with 0.6 nozzle and 0.3 layer height without any issues. But i'm planing to redesign it a bit and print with higher quality. My 5015 fan wont fit into the hole and event cracked it a bit, so i tied it with a zip tie for now.
Speaking of remix - can i ask you to share the STEP file? Or anything with proper geometry data.