Printed with 0.12mm layer height and a 0.4mm nozzle. I used 4 walls with 30% Gyroid infill. Turned out pretty well and is really strong. However, I'd add some supports next time as some of the overhangs did to turn out too smooth. But maybe that's just be, being a 3d printing newbie. =)The design is just awesome! (edited)
Printed with 0.12mm layer height and a 0.4mm nozzle. I used 4 walls with 30% Gyroid infill. Turned out pretty well and is really strong.
However, I'd add some supports next time as some of the overhangs did to turn out too smooth. But maybe that's just be, being a 3d printing newbie. =)
The design is just awesome! (edited)