@Kilian_haa Thanks for sharing! I hope it works well for you. You should also be able to switch the horizontal piece to the other side of the arm. This moves the spool further from the top frame and give the filament path more clearance when using direct drive. That's what I did after moving to the MK4 direct drive hotend. Enjoy!
@nightfallvt I moved it to the other side, now it looks a lot better. Tanks! (edited)
@Kilian_haa Thanks for sharing! I hope it works well for you. You should also be able to switch the horizontal piece to the other side of the arm. This moves the spool further from the top frame and give the filament path more clearance when using direct drive. That's what I did after moving to the MK4 direct drive hotend. Enjoy!